Rosco Chroma Key Paints have been formulated with the assistance of video technicians throughout the country. They are manufactured to provide the high luminance values and colour saturation for keying effects.

Application: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

Surface preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime . If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.

Dilution: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.

All technical data, recommendations and service are accurate to the best of our knowledge. Stage Depot / Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

CAUTIONS: Do not apply when surface or air temperatures are below 50 degrees F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.